Bevel gears


bevel-gear-supplierBevel gears are used mostly in situations that require power to be transmitted at right angles (or applications that are not parallel). Bevel gear can have different angles of application but tend to be 90°.

Bevel gears connect intersecting axes and come in several types. The pitch surface of bevel gears is a cone. They are useful when the direction of a shaft’s rotation needs to be changed. Using gears of differing numbers of teeth can change the speed of rotation.

Bevel gears permit minor adjustment during assembly and allow for some displacement due to deflection under operating loads without concentrating the load on the end of the tooth. For reliable performance, they must be pinned to shaft with a dowel or taper pin. Bevel gear sets consist of two gears of different pitch diameter that yield ratios greater than 1:1.

Send us your requirements for gears just by clicking on this link or call us at +919810645100 and you will talk to Vishal Goela at Goela Engineers (a gear manufacturing company) to discuss more. We shall be more than happy to offer our best services and products.

Types of bevel gears:
The bevel gears can be of varied types and the types are known by the teeth of the gears. Different varieties are: